500 W AC-DC Full Brick

Advanced Energy’s Artesyn AIF-500 series full-brick module accepts a wide 90 to 264 VAC input. Rated at 504 W, the module has a high conversion efficiency of 93% typically and provides a nominal isolated output voltage of 12 VDC with a 10 V auxiliary output. Featuring an industry-standard 2.4 x 4.6 in fullbrick form factor and a height of only 0.55 in. This family of modules is particularly focused on providing contact-cooled applications such as I.P. sealed applications where the power converters are located inside the applications I.P. Sealed casing. The functions and features (such as internal inrush-limiting, active current-share, Auxiliary Output and PMBus) of this family have been provided to enable ease of use in applications with minimize external component requirements.

Features

• Input voltage 90 - 264Vac
• Input voltage Frequency 47hz to 63hz
• Output Noise 120mV pk-pk max (12V version)
• Output voltage 12 Volts
• Output current 42 Amps
• Auxilary Output 10V at 250mA
• Hold-up HVDC 380Vdc
• Control Output voltage Adjust -20% to +10% Vout
• Isolation 4000Vdc Input to Output
• Isolation 2500Vdc Input to Baseplate
• Isolation 100Vdc Output to Baseplate
• Efficiency >91.5% low-line input
• Parallel unit capability Up to 10 units
• Thermal Derating 100% power at 100degC baseplate
• Efficiency >93.5% High-line input

Benefits

• Input Inrush Internal Inrush limiting
• Control PMBus interface
• Control Output voltage sense
• Control Active current share
• Control PSU enable
• Control PSU-Good signal