2400 W Full Brick PFC Converter

The 2.4 kW AIF06ZPFC series power factor correction module presents a unity power factor from an 85 to 264 VAC input and delivers a high 97.3% conversion efficiency and nominal non-isolated output of 400 VDC. The series features monitoring, protection, and adjustment facilities, a built-in PMBus® interface, internal memory, and internal inrush limiting. Accurate current sharing allows paralleling and a thermal base plate allows a baseplate operating temperature range of -20 to +100℃ with startup from as low as -40℃. Featuring an encapsulated standard 2.4 x 4.6-inch (61 x 116.8 mm) full-brick form factor and an installed height of 0.55 inches (13.7 mm), the series has a power density of 395 W/inch³ (24.1 W/cm³). Insulator-sheet and EMI-shield options are available.

Features

• Input range 85 - 264Vac
• Output current 6 Amps maximum
• Output Voltage 400Vdc nominal
• Output power 1,400W between 85Vac and 180Vac
• Output load regulation 1% Vout load regulation
• Output power 2,200W between 180Vac and 200Vac
• Output power 2400W between 200Vac and 264Vac
• Mechanical 2.4 by 4.6 inch full brick
• Inrush current limit Function provided internal to the AIF06
• Parallel module -01L can be used with 1 or 2 modules
• Parallel module can be used with 3 to 10 modules

Benefits

• Enable function Positive or negative enable variants
• Isolation Non-isolated.
• Control PMBus interface provided.