35 W Sixteenth-Brick Isolated DC-DC Converters
Get comprehensive protection against overvoltage, overcurrent, and overtemperature conditions with our ALD series of sixteenth-brick isolated DC-DC converters. The series is composed of seven single-output models offering fully regulated voltages of 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5.0 V, or 12.0 V. Suited for use with standard 48 V telecommunications equipment supplies, these 35 W DC-DC converters have a wide 2:1 input range of 36 to 75 VDC.
These converters employ an open-frame construction and use fixed-frequency switching to minimize the need for EMI filtering while operating at an ambient temperature of -40 to 85ËšC. Providing up to 91% efficiency at full load, the converters have an installed height of just 0.34 inch–making them ideal for systems with demanding inter-board spacing requirements
Part Numer:
ALD07A48N-L
ALD10F48N-L
ALD11G48N-L
ALD13Y48N-L
ALD15K48N-L
Features
- EU Directive 2002/95/EC Compliant for RoHS
- Input Surge 100 V / 100 ms
- Efficiency 90.5% @ 12 V (typ)
- Input Voltage 36 - 75 VDC
- Overvoltage Protection 125% Vo typ (autorestart)
- Remote Sense Up to 10% of Vo
- Transient Response 3%Vo (typ) deviation, 50% to 75% Load Change
- Over Current Protection 115% Io typ (autorestart)
- Over Temperature 115°C average PCB temperature (autorestart)
- Noise/Ripple 40mVp-p typ
- Load Regulation ±0.1%Vo typ
- Line Regulation ±0.1%Vo typ
- Isolation Voltage 1500 Vdc
Benefits
- Basic Insulation
- Fixed frequency switching
- High capacitive load limit on startup
- High Density
- High Efficiency
- Regulation to zero load
- Through Hole or Surface Mount Termination
- Switching Frequency Fixed Frequency
- Enable Logic Negative (N suffix) or Positive
Sorry, currently do not have any video uploaded.
