Laboratory High Voltage Equipment

  Trek 5/80 – High-Performance DC-Stable High Voltage Power Amplifier

The Trek 5/80-HS is a precision, non-inverting high-voltage power amplifier designed for applications requiring fast response, high stability, and accurate control of reactive or capacitive loads.

Trek 609E-6 Series–High Voltage Amplifier for Industrial and Research Applications, Output Voltage 0 to ±4 kV DC or Peak AC

The DC-stable Trek® 609E-6 high-voltage amplifier is used for electrostatic chucks, mass spectrometers, and various other industrial and research applications.

Trek 623B Series – High Voltage Amplifier for Precise Control of Bipolar Output Voltages, 0 to ±2 kV DC or Peak AC

The Trek® 623B features an all-solid-state design for high slew rate, low-noise operation, and an extensive bandwidth of DC to greater than 10 kHz.

Trek PZD700A Series – DC-Stable, High Voltage Piezo Driver and Amplifier, Output Voltage 0 to ±700 VDC or Peak AC

The DC-stable Trek® PZD700A is a high voltage piezo driver and amplifier that offers precise control of customer specified output voltages in bipolar or unipolar ranges.

  Trek 610E Series - High Voltage Amplifier, Controller, and Supply, Output Voltage 0 to +/-1 kV or 0 to +/-10 kV

The Trek 610E offers six modes of high-voltage operation. As a high-voltage amplifier, the Trek 610E amplifies an externally applied signal with a switch-selectable setting of 100 V/V or 1000 V/V.

Trek 10/10B-HS Series– High Speed, High Voltage Amplifier, Output Voltage 0 to ±10 kV DC or Peak AC

To enable accurate output responses and the high slew rates needed to drive reactive loads, the Trek® 10/10B-HS high voltage amplifier features a four-quadrant, active output.

  Trek 10/40A-HS Series - High-Speed, Non-Inverting High Voltage Amplifier, Output Voltage 0 to ±10 kV DC or Peak AC
The non-inverting Trek® 10/40A-HS is equipped with a four-quadrant, active output that sinks or sources the current into reactive or resistive loads throughout the output voltage range.

Trek 20/20C-HS Series High-Speed, High Voltage Amplifier, Output Voltage 0 to ±20 kV DC or Peak AC
The non-inverting Trek® 20/20-HS high voltage amplifier features an all-solid-state design, high slew rate, ample bandwidth, and low-noise operation.

Trek 30/20A Series Non-Inverting High Voltage Amplifier, Output Voltage 0 to ±30 kV DC or Peak AC
The high voltage amplifier Trek® 30/20A is DC-stable and has an all-solid-state design that enables a high slew rate, wide bandwidth, and low-noise operation. It features a non-inverting fixed gain of 3000 V/V.

Trek 40/15 Series Non-Inverting High Voltage Amplifier, Output Voltage 0 to ±40 kV DC or Peak AC
The DC-stable Trek® 40/15 high voltage power amplifier features an all-solid-state design, non-inverting configuration, and a fixed gain of 4000 V/V.

Trek 50/12 Series High Voltage Amplifier that Provides Precise Control of Output Voltage 0 to ±50 kV DC or Peak AC
The Trek® 50/12 DC-stable, high-voltage power amplifier features an all-solid-state design for high slew rate, wide bandwidth, and low-noise operation.